H6M-FPHN Manual Changeover Rock Regulator with flexible pigtails

H6M-FPHN

The H6M-FPHN Rock Regulator is fantastically designed to deliver 300MJ/HR at 2.75kpa of LPG. This particular setup is used where the Gasfitter is looking to install two gas cylinders with a manual change over valve. This installation is used so that the customer can isolate one cylinder while the other is in use. If the gas cylinder runs empty a simple turn of the valve will enable the other cylinder to withdrawal gas while the other is isolated. This allows the original supply cylinder to be either changed or filled. The H6M-FPHN Rock Regulator is suitable for applications such as caravans, pie trucks and general households. This regulator also includes a plug on the left hand side of the 2nd stage part of the regulator which enables you to remove and install a 1/8 MBSP test point allowing you to check your gas pressure. This setup includes two stainless steel flexible braided pigtails at a length of 600mm allowing this to be suitable for up to 90kg gas cylinders. The regulator is both approved with UL144 & AGA Approval.

Manual Changeover Rock Regulator with flexible pigtails

 

Application:        

 

Gas Type: LPG (PROPANE)

 

Inlet Connection: ¼ FNPT

 

Outlet Connection:  ½ FBSP

 

Capacity:  300MJ/hr (LPG)

 

Outlet Pressure: 2.75kpa

 

UL Approval Number: UL144

 

AGA Approval Number: 7995G

Product enquiry about H6M-FPHN Manual Changeover Rock Regulator with flexible pigtails